A toyota key fob battery is usually a CR2032 in a push-button smart key from the 2010s onward, or a CR2016 in an older remote-head or flip key. The stamp on the old cell wins. CR2025 is the thinner cell of the same width on some older compact remotes. CR1632 and CR1616 are uncommon here, not equal choices.
CR2016 older remote or flip key20 mm across, 1.6 mm thick. The usual older remote-head and flip cell, not a CR1616.
CR2025 thinner same-width cell20 mm across, 2.5 mm thick. Some older compact remotes only.
Uncommon, not a third equal path: CR1632 is reported on some mid-generation smart keys, including certain Prius shells, and sources sometimes disagree. CR1616 is uncommon on Toyota. Do not make it the default older cell.
Start with the job in front of you
- the page What Battery Does a Toyota Key Fob Take
- the write-up on How to Replace a Toyota
- notes for How to Open a Toyota Key Fob
- Toyota Key Fob Battery Size Chart
- the page Toyota Key Fob CR2032
- the write-up on Toyota Key Fob CR2016
- notes for Toyota Key Fob CR2025
- Toyota Key Fob CR1632
- the page Toyota Key Fob CR1616
- the write-up on Start a Toyota with a Dead Key Fob
- notes for Toyota Key Fob Not Working After Battery Change
- Toyota Key Fob Low Battery Warning
- Toyota Cost
- the write-up on How Long a Toyota Lasts
- notes for Toyota Smart Key vs Flip Key Battery
- Toyota Key Fob Battery Polarity
- the page Programming a Toyota Key Fob After a Battery Change
- the write-up on Toyota Key Fob Only Works Up Close
- notes for Toyota Key Fob Locks but Will Not Unlock
- Best Battery for a Toyota Key Fob
Pick the model hub
- the write-up on Toyota Camry
- the write-up on Toyota Corolla
- the write-up on Toyota RAV4
- the write-up on Toyota Hilux
- the write-up on Toyota Prius
- the write-up on Toyota Highlander
- the write-up on Toyota Tacoma
- the write-up on Toyota Tundra
- the write-up on Toyota Sienna
- the write-up on Toyota 4Runner
One cell is the normal count. Plus is the flat branded face unless a mark in the shell says otherwise. A battery-only swap does not require programming. CR2450, A23, and LIR2032 do not belong in these fobs.